Hello All: Sorry to ask what will be an obvious question to some of you, but what standards apply for CE marking of professional audio equipment? I'm a telecom guy, but I have been asked about professional audio equipment and do not know the answers.
The product in question is a digital reverb processor that is typically used in a professional recording studio. For those who have been following the recent LVD discussion on the list, I should note that this product is basically a SELV device that uses a CE marked "wall wart" power supply. The wall supply is connected to the SELV unit with a hardwired cable. I am interested to know what safety standard applies to this product, and whether additional testing is required beyond the existing power supply approval. I am also interested in what EMC requirements apply, and whether the emissions classification would class A or class B. Any insight would me appreciated. Joe Randolph Telecom Design Consultant Randolph Telecom, Inc. 781-721-2848 [email protected] http://www.randolph-telecom.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
