This is a multi-part message in MIME format.
Bill, An ADSL modem is telecom terminal equipment and must comply with the RTTE Directive. Harmonised standards to comply with: Art 3.1a) Safety and health: EN60950(-1) Art 3.1b) EMC: EN55022, EN55024, EN61000-3-2, EN61000-3-3 Art 3.2 Radio: only applicable if your modem has a radio interface.
For the valid versions of the harmonised standards, take a look at: http://europa.eu.int/comm/enterprise/newapproach/standardization/harmstds/re flist/radiotte.html Vriendelijke Groeten, Best regards, Meilleures salutations, Kristiaan Carpentier Regulatory and Approval Engineer Thomson Prins Boudewijnlaan 47, B-2650 Edegem, Belgium Tel: +32 3 443 6407 - Fax: +32 3 443 6632 e-mail: [email protected] www.speedtouch.com From: Bill Stumpf [mailto:[email protected]] Sent: dinsdag 1 juli 2003 20:38 To: [email protected] Subject: R&TTE requirements To all, A manufacturer of an ADSL modem/router needs to meet both the EMC and R&TTE Directives. What standards are applicable to the device under the R&TTE Directive as telecommunications terminal equipment? Thanks in advance, Bill This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstcTitle: RE: R&TTE requirements
Bill,
An ADSL modem is telecom terminal equipment and must comply with the RTTE
Directive.
Harmonised standards to comply with:
Art 3.1a) Safety and health: EN60950(-1)
Art 3.1b) EMC: EN55022, EN55024, EN61000-3-2, EN61000-3-3
Art 3.2 Radio: only applicable if your modem has a radio interface.
For the valid versions of the harmonised standards, take a look at:
http://europa.eu.int/comm/enterprise/newapproach/standardization/harmstds/re
flist/radiotte.html
Vriendelijke Groeten, Best regards, Meilleures salutations,
Kristiaan Carpentier
Regulatory and Approval Engineer
Thomson
Prins Boudewijnlaan 47, B-2650 Edegem, Belgium
Tel: +32 3 443 6407 - Fax: +32 3 443 6632
e-mail: [email protected]
www.speedtouch.com
-----Original Message-----
From: Bill Stumpf [mailto:[email protected]]
Sent: dinsdag 1 juli 2003 20:38
To: [email protected]
Subject: R&TTE requirements
To all,
A manufacturer of an ADSL modem/router needs to meet both the EMC and
R&TTE Directives. What standards are applicable to the device under the
R&TTE Directive as telecommunications terminal equipment?
Thanks in advance,
Bill
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
<<attachment: Carpentier_Kristiaan.vcf>>
