Nick, Sorry, I can't help as this standard is not in my subscription. However, are you aware that EN50091-1 was superseded by EN 50091-1-1, which remains current, but has itself been superseded by EN 62040-1-1:2003?
Best regards, Neil R. Barker Compliance Engineering Manager e2v technologies ltd Waterhouse Lane Chelmsford Essex CM1 2QU U.K. Tel: +44 (01245) 453616 Fax: +44 (01245) 453410 E-mail: [email protected] > -----Original Message----- > From: Nick Williams [mailto:[email protected]] > Sent: 03 July 2003 21:29 > To: [email protected] > Subject: EN50091-1 question > > > > I have a need to know a detail of the above standard more quickly > than I can obtain a copy, if someone would be so good as to help me. > > What is the voltage range (percentage of rated voltage) defined for > heating and other tests in the above standard for normal and abnormal > operation? > > Any help in this regard appreciated. > > Nick. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
