Paolo, I am not aware of a commercial or EN standard for more than 16 amperes. There are some military standards that also address this. The one that I have seen in the past was MIL-STD-704.
>From a product specification perspective, the customer or company can create a standard calling many different requirements while referring to a base standard. I do this periodically when I know of specific areas when I need to have products evaluated to standards that I consider good engineering practice, even if the product falls outside of the standard. Thanks, Bryan. From: Paolo Peruzzi [mailto:[email protected]] Sent: Tuesday, July 22, 2003 6:45 AM To: [email protected] Subject: voltage dips Hi all, Is there any basic standard concerning voltage dips and short interruptions immunity for equipment with input current larger than 16 amps per phase? And more: can a product standard prescribe such test for equipment with more than 16 amps per phase and still refer to 61000-4-11 as basic standard? Thanks, Paolo Peruzzi Esaote S.p.A. Research & Product Development - Design Quality Control via di Caciolle, 15 I- 50127 Florence tel: +39 055 4229469 fax: +39 055 4223305 e-mail: [email protected] This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
