I read in !emc-pstc that [email protected] wrote (in <OFF90D5CD0.F2B66 [email protected]>) about 'NEW EMC Standards' on Thu, 24 Jul 2003: >I am on the point of specifying a new signal generator for in-house >radiated immunity testing. Does anybody out there have a feel for where >the upper test frequency limit is likely to go for industrial >instruments covered by EN 61326 and similar? Is it likely to remain at 1 >GHz, or is an extension to 2 GHz, or even higher seen on the far and >distant horizon?
Over 2 GHz is certainly likely. Think 3 GHz, or 6 GHz if you can afford it. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
