I read in !emc-pstc that [email protected] wrote (in <E6F64B42266D6 [email protected]>) about 'Hipot question' on Tue, 5 Aug 2003: >I am testing some in-house equipment that is covered under EN61010. Is >the AC line touch current limit 3.5 mA at line + 10%? When I run a hipot >test am I allowed to use 2121 VDC rather than 1500 VAC? Due to the 0.047 >uF X caps the AC hipot current is somewhat high.
You are testing a product to a standard, but you don't have a copy of the standard? That is really unwise! -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
