I suggest that an arc is something continuous and producing light or
illumination.  A spark is something abrupt and short lived.

Ralph McDiarmid, AScT 
Compliance Engineering Group
Xantrex Technology Inc.



From: Speakman, Jim [mailto:[email protected]] 
Sent: September 22, 2003 8:32 AM
To: [email protected]
Subject: Arcing & Sparking



Fellow Listers

At a recent equipment design review, a discussion on arcing and sparking
indicated a lack of definitive knowledge of the difference between an 'arc'
and a 'spark'.

Is an 'arc', basically just a long 'spark'.  If so, at what point
(precisely) does a 'spark' become an 'arc'?

Have I got it all wrong?  Are they 'something else'.

Can anyone enlighten my darkness?

__________________________
Jim Speakman
(Design Safety Representative (Southern Sites)

Thales Defence Ltd
Thales Sensors 
Manor Royal
Crawley
West Sussex
RH10 9PZ


> *     Tel:    +44(0)1293 644911
> *     Mob:    +44(0)7968 529439
> *  Fax :      +44(0)1293 644194
> *    e-mail   [email protected]
> 
__________________________
This e-mail contains confidential information for the addressee only.  If a
transmission error has misdirected this e-mail, please notify us on
+44(0)1293 644911 and delete it and all copies from your system.  You 
+should
not use, disclose, distribute or copy this communication if received in
error.



This message is from the IEEE EMC Society Product Safety Technical Committee
emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

Archive is being moved, we will announce when it is back on-line. All
emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc


This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc

Reply via email to