The following query relates to IEC60950:2000 and -1, §1.7.6. Is anyone aware of any CTL decisions for IEC60950:2000 or -1, where operator accessible fuse replacement marking requirements may be waived, based on the fuse not being required for safety reasons (did not open during any test under any conditions of test) and where of the fuse may be replaced by an operator/user?
I have checked the CB Scheme web site and found no CTL Decisions related to §1.7.6. I ask because I've seen references to CTL Decisions on this list that were not posted on that web site. Regards, Peter L. Tarver, PE Product Safety Manager Homologation Services Sanmina-SCI Corp. San Jose, CA [email protected] This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
