I read in !emc-pstc that [email protected] wrote (in <174.1f945a94.2c7e [email protected]>) about 'fuse replacement markings' on Wed, 27 Aug 2003: > There are plenty of fuse standards other than IEC 60127 and > unfortunately there is little or no commonality in marking > requirements between them. Also, the upper limit of 6.3A for IEC > 60127 fuses is far too limiting for certain types of IT equipment > (some telecomms equipment use DC rated fuses in the hundreds of > amps range, for example).
Why did you post your message five times? -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
