fyi...
Attached is a note I've sent to Sergio regarding EMC Simulation Software, I
thought the group could benefit from the information.
----- Forwarded by Scott Mee/NA/Johnson_Controls on 09/02/2003 10:57 AM
Scott Mee
To:
[email protected]
08/27/2003 11:24 cc:
AM Subject: Re: EMC simulation
software(Document link: Scott Mee)
Sergio,
I apologize for the late reply, however, I have some information that may
be of use to you.
We have been using the Omega PLUS software for board level analysis for
roughly 1.5 years. We use the software for a number of purposes:
1) Cross-talk analysis
2) Signal Integrity Analysis
3) E/H Field 2D Analysis
One of the nice features it has is the running database. It keeps track of
all of your component models so that you don't have to rebuild them each
time you simulate boards. As you build the database, simulations become
quick and easy since the software recalls the components from that
database.
We've found good correlation between our product measurements and the
simulation results. We also use the tool as a part of our design process
to help us make decisions on which layout techniques will result in lower
emissions. Additionally, the technical support is wonderful!
I can provide more information as needed, or answer any questions. Please
let me know.
Best Regards,
Scott Mee
Johnson Controls Inc.
Automotive Systems Group
EMC Product Compliance
616.394.2565
[email protected]
sergio.loures@siemens.
com To:
[email protected]
Sent by: cc:
owner-emc-pstc@majordo Subject: EMC simulation
software
mo.ieee.org
08/14/2003 07:19 PM
Please respond to
sergio.loures
<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office"
/>Hi all,
I have just downloaded an evaluation copy of the Omega PLUS software, from
Quantic-EMC, for EMC simulations and it seems to be a good software.
Has someone an opinion of this product? What similar software do you
suggest?
Regards
Sérgio L. Rocha Loures
IC SC QP Q - Quality Assurance
Supply Chain - Quality and Processes
SIEMENS
(Tel: +55 41 341-5898
ÊFax: +55 41 341-5058
*[email protected]
Minha opinião e não necessariamente a do meu empregador.
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
