The German Equipment Safety Law requires the installation and maintenance manuals to be in German. Reference Annex ZC.1.7.12 of EN 60950.
Richard Woods Sensormatic Electronics Tyco International From: [email protected] [mailto:[email protected]] Sent: Sunday, October 26, 2003 4:43 PM To: [email protected] Subject: IEC60950 - Language of user handbook Are there any requirements in IEC60950 which says that the language of installation / user handbook, must be in the official language where the product is for sale? Thanks. Best regards Amund Westin Oslo, NORWAY This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
