I read in !emc-pstc that [email protected] wrote (in <LFENJLPMMJB [email protected]>) about 'SV: Who is responsible?' on Thu, 27 Nov 2003: >It us assume that >X = Computer - made by Manufacturer A >Y = Monitor - made by Manufacturer A >Z = Monitor - made by Manufacturer B > >Usually, manufacturer A sells X and Y and those units are included in >the DoC. But shall A make Z into the DoC if they in addition sell that >configuration
The combinations of 'A and X' and 'A and Y' are 'systems' under the EMC Directive if marketed together by the manufacturer. Each 'system' must have its own DOC. >and what about if A only sell X (computer) and leave it to >the buyer to those monitor ? Then the combination of A and any monitor is an 'installation' and each item, computer and monitor (and printer and scanner and....) must have its own DOC. I'm a bit surprised to see this question raised in 2003. It was very commonly asked several years ago. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
