Greetings All, Hopefully someone has some insight to the following-
In GR-1089 Issue 3, Section 3.2.1, requirement R3-1 [8] uses the FCC Class A and B limits for equipment with no doors or covers for the range of 30MHz to 1GHz. It also has limits for below 30MHz and above 1GHz. This section I understand. What I don't understand clearly is requirement R3-3 [10]. It references emissions from Class A and B unit's not exceeding Table 3-2. Table 3-2 limits are higher than the FCC Class A and B limits. The doors or covers are to be opened during emission testing. However, if the doors and covers that are not intended to be opened during EUT operation, maintenance, and/or repair need not be opened, I can still test to those higher limits. If so, I can no longer can be considered FCC A or B equipment. Is requirement R3-3 [10] mainly for central office areas and not residential? Thanks. Richard ===== Richard Georgerian Compliance Engineer Carrier Access Corporation 5395 Pearl Parkway Boulder, CO 80301 USA Tele: 303-218-5748 Fax: 303-218-5503 mailto:[email protected]
