If we have some of our boards conformal coated, As long as we use a recognized
conformal coating, does the process have to be under a follow-up service ?
The boards are not coated because of spacing, but rather because of customer
request. I tried to contact UL but could get no straight answer.
Thanks,
Jim Sotherden
Agency Coordinator/Test Engineer
gGE Fanuc Automation Americas
Route 29N & 606, Charlottesville, VA 22911
PH: (434) 978-6224 Fax: (434) 978-5102 Dial Com *277-6224
Email: [email protected]
Web: www.gefanuc.com
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ieee-pses.org/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
