I read in !emc-pstc that Brian O'Connell <[email protected]> wrote (in <[email protected]>) about 'heating (temperature) test on SMPS with CB report EN 60950' on Mon, 26 Jan 2004: > The only acceptable thermocouple wire, for measuring magnetic > component temperatures, is type "T". The *worst* possible t/c for > mags is type "J"; type "K" can be used if you are careful with > placement and routing.
Without wishing to cast any doubt on what you say, it would be helpful to explain why, especially about type K. -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
