<[email protected]> wrote: [EN61000-4-6]
> Some comments to Neven: > -When you use BCI clamp you can measure and limit the current as you describe. > -The impedance is not >150 ohms but with +/- tolerance, see Table 3. > -The EUT needs to have 150 ohms from chassis to earth so the impedance is not as low as you say Really "_chassis_ to earth" - where do you read this? Oliver -- Oliver Betz, Muenchen This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
