Larry,
thank you so much !!!
The procedure works fine!!!
You can't imagine how helpful your hint was to me.
Thanks again,
Paolo
**************************************************
Paolo Peruzzi
Esaote S.p.A.
Research & Product Development - Design Quality Control
via di Caciolle, 15 I- 50127 Florence
tel: +39 055 4229469
fax: +39 055 4229422
e-mail: [email protected]
**************************************************
[email protected]
om Per:
[email protected]
Cc:
09/01/04 20.35 Ccr:
Oggetto: Re: HELP - HP8542E
trouble !!!
Paulo,
I have run into this before and when HP was still supporting it they
told me how to solve the problem. The list is now too long (somehow). Here
is what you need to do.
1. Turn off the receiver.
2. Connect the keyboard (hopefully you have the one that came with the
unit). I think most will work though.
3. Turn on the analyzer.
4. Press ESC on the keyboard until the top of the display says. "Keyboard
-> Command
5. Type SIGDEL ALL; <return>
The list should now be deleted and accessable.
Let me know if this works.
Larry K. Stillings
Compliance Worldwide, Inc.
357 Main Street
Sandown, NH 03873
(603) 887 3903 Fax 887-6445
www.complianceworldwide.com
Privileged/Confidential Information may be contained in this message. If
you are not the addressee indicated in this message (or responsible for
delivery of the message to such person), you may not copy or deliver this
message to anyone. In such case, you should destroy this message and kindly
notify the sender by reply email. Please advise immediately if you or your
employer do not consent to Internet email for messages of this kind.
Opinions, conclusions and other information in this message that do not
relate to the official business of my firm shall be understood as neither
given nor endorsed by it.
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ieee-pses.org/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
