Hello Group, I was forwarded the following question from a fellow engineer. I was wondering if anyone knows of any reference material pertaining to Dry Circuits and what constitutes a Dry Circuit. "When you see a reference to either 'dry contact' or 'dry circuit' as far a relay goes, what does this mean the relay is designed to handle?"
As always, your guidance is always appreciated. Regards, David Cereceres Product Safety Engineer Pelco Phone:559-292-1981 ext.3493 Fax: 559-294-3707 mailto:[email protected] <mailto:[email protected]> http://www.pelco.com/ <http://www.pelco.com/> ================ Confidentiality Note: The information contained in this transmission is legally privileged and confidential, intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you receive this communication in error, please delete the message and notify us immediately by telephone call to +1-559-292-1981. ================ This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
