Although from a different perspective, some time ago we upgraded our computer and had to upgrade our NI card at the same time. We then had quite a problem getting the system working again, not knowing whether it was the reinstallation of the software in the new PC or the settings on the new card that were preventing the analyser from working. The "handbooks" with both cards were not particularly helpful but after some experimentation with combinations of DIL switch positions, we eventually achieved success.
Regards, Neil Helsby ********************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote confirms that this email message has been swept for the presence of computer viruses and is believed to be clean. ********************************************************************** This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
