Anders -
See my responses, below. > From: Anders Svensson B > Sent: Friday, March 05, 2004 1:31 AM > > Question 1: How about the external place > antennas. How can we meet the requirements in > UL2043 for the antennas? This will depend on the volume of material, its heat content and the amount of smoke it will produce, when consumed by the test flame. > Question 2: Do we need to do test on a metallic > enclosure against UL 2043 or is it only paper > work to have it certified? Testing of each equipment design is required. > Question 3: How about the attached cables (DSL-, > LAN-, power input cable POE or AC/DC adapter and > WAN cable). Must they also meet the requirements > for UL2043. There are dependencies based upon a number of items, but interconnecting LAN cables are not considered, since the UL2043 is an equipment standard, as opposed to UL910, which required a representative installation, with cabling. If you wish more help with this, you can contact me off the list. Regards, Peter L. Tarver, PE [email protected] This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
