Hello group, Anyone who knows about the requirements of UL 2043 (plenum rated). We design a WLAN access point that should be plenum rated against UL2043. The enclosure should be of metallic. The product could be placed in air handling spaces.
Question 1: How about the external place antennas. How can we meet the requirements in UL2043 for the antennas? Question 2: Do we need to do test on a metallic enclosure against UL 2043 or is it only paper work to have it certified? Question 3: How about the attached cables (DSL-, LAN-, power input cable POE or AC/DC adapter and WAN cable). Must they also meet the requirements for UL2043. Regards Anders This communication is confidential and intended solely for the addressee(s). Any unauthorized review, use, disclosure or distribution is prohibited. If you believe this message has been sent to you in error, please notify the sender by replying to this transmission and delete the message without disclosing it. Thank you. E-mail including attachments is susceptible to data corruption, interruption, unauthorized amendment, tampering and viruses, and we only send and receive e-mails on the basis that we are not liable for any such corruption, interception, amendment, tampering or viruses or any consequences thereof. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
