Pat Lawler posted: >> If a product is rated for 100-240Vac operation, this means test levels like 40Vac for 100ms (100Vac/50Hz nominal input, 60% dip for 5 cycles). The performance criteria makes this especially difficult - "The system shall provide essential performance". <<
Do not forget that, in large part, the *manufacturer* must say what "essential performance" is. Cortland Disclaimer: My opinions; NOT those of my agency or where I work. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
