Neil,
For low power radio equipment, EN 60950 has been superseded by EN 301
489-1, 3 and the Low Voltage Directive applies.
Regards,
Frank de Vall
Assa Abloy ITG
"Barker, Neil"
<Neil.Barker@e2vtechno To: "'Helge
Knudsen'" <[email protected]>,
logies.com> "Emc-Pstc@Majordomo.
Ieee. Org (E-mail)"
Sent by:
<[email protected]>
owner-emc-pstc@majordo cc:
mo.ieee.org Subject: RE: EN/IEC 60215
Safety requirements for radio
transmitting equip ment
04/06/2004 03:39 AM
Please respond to
"Barker, Neil"
I am not aware of any such limit. However, in my opinion EN60215 is a
very inadequate standard and certainly not evidence of best-practice safety
engineering.
For most low power radio equipment I would apply EN 60950. I think that you
will find that most of the applicable ETSI standards will require this.
Best regards,
Neil R. Barker C.Eng. MIEE MIEEE MSEE
Manager
Compliance Engineering
e2v technologies ltd
106 Waterhouse Lane
Chelmsford
Essex
CM1 2QU
UK
Tel: +44 (0)1245 453616
Fax: +44 (0)1245 453410
e-mail: [email protected]
Web: http://www.e2vtechnologies.com
From: Helge Knudsen [mailto:[email protected]]
Sent: 06 April 2004 09:00
To: Emc-Pstc@Majordomo. Ieee. Org (E-mail); [email protected]
Subject: EN/IEC 60215 Safety requirements for radio transmitting
equipment
Hello group(s)
I have been told that we may have to apply this standard on our Radio
transceivers.
Does anyone know if there is a lower RF power limit in this standard where
the standard does not apply?
Best regards
Helge Knudsen
Test & Approval
Niros Telecommunication
Hirsemarken 5
DK-3520 Farum
Tel +45 44 34 22 51
Fax +45 44 99 28 08
email [email protected]
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ieee-pses.org/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
**********************************
***************************************
*****************************************************************
The information contained in this electronic mail transmission is
confidential, may contain information that is privileged
and/or proprietary, and is intended to be sent only to the stated
recipient of the transmission.
If you are not the intended recipient or the intended recipient's
agent, you are hereby notified that any review,
use, dissemination, distribution or copying of this communication is
strictly prohibited. You are also asked to notify us
immediately by telephone or return email and to delete this
transmission with any attachments from your entire system
and destroy all copies in any form.
Thank you in advance for your cooperation.
**********************************
***************************************
*****************************************************************
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ieee-pses.org/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
