http://www.ieee-pses.org/symposium http://www.emc2004.org/
Dear Experts, Is the situation with 125kHz RFID reader (5cm range) the same ? I am asking, because I was told, that 125kHz is not harmonised (whatever that means) and notified Body is needed. If the situation is the same what point, or paragraph says it. Regards Piotr Galka [email protected] From: "Gemma Paolo" <[email protected]> To: <[email protected]>; <[email protected]>; <[email protected]> Sent: Tuesday, June 01, 2004 9:14 AM Subject: RE: EU notified bodies for obtaining CE certification for Intentional Radiators > http://www.ieee-pses.org/symposium > http://www.emc2004.org/ > -------------------------------------------------- > > Under R&TTE if you apply Harmonized Standard like the two standard mentioned by you, there are no obligation to go to a EU notified Body. > You have only to apply all the harmonized standards covering EMC, SAFETY and radio aspects prepare a Technical documentation and signa declaration of conformity. > The test shall be execute in a laboratory that can apply the standards also a internal laboratory is OK. > Under the R$TTE The Notified Body is not oblige to execute the test but hit rule is only to revised the give a opinion on the Technical Construction File (annexIV) and certify your internal quality system (annex V). > > EN 301 489-1 and EN 301 489-3 for SRD contain emission and immunity requirement > > Bye > Paolo > > _________________________________________________ > > Paolo Gemma > > Siemens Mobile Communications S.p.A. > > SMC PG MW ST EMC & Safety > > SS Padana sup. KM 158 20060 Cassina de' Pecchi (MI) Italy > > phone +39 02 9526 6587 fax +39 02 9526 6375 > > mobile +39 348 3690185 > > e-mail [email protected] > > _________________________________________________ > > > > > -----Original Message----- > > From: [email protected] > > [mailto:[email protected]] > > Sent: martedì 1 giugno 2004 8.00 > > To: [email protected]; [email protected] > > Subject: EU notified bodies for obtaining CE certification > > for Intentional Radiators > > > > > > http://www.ieee-pses.org/symposium > > http://www.emc2004.org/ > > -------------------------------------------------- > > > > Dear Experts, > > Is it compulsory that only EU notified bodies / labs > > should do the testing to confirm the compliance to EN300330 & > > EN301489 for obtaining CE marking. Is there any other way to > > obtain CE certification for Intentional radiating devices > > operates at 13.56 MHz (ISM frequency). Or is there any > > excemption for devices operating at ISM frequencies? What > > about the immunity standards for these type of devices? Is > > EN55024 applicable? > > Once again I am approaching this list for finding the > > labs those are European Union notified bodies, for obtaining > > CE certification for Intentional Radiating devices. > > > > Sincerely > > > > K.Balasubramanian > > Sr.Engineer, Hardware. > > > > ------------------------------------------- > > > > This message is from the IEEE Product Safety Engineering > > Society emc-pstc discussion list. > > > > IEEE PSES Main Website: http://www.ieee-pses.org/ > > > > To post a message send your e-mail to [email protected] > > > > Instructions for use of the list server: > > > http://listserv.ieee.org/listserv/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > ------------------------------------------- > > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. > > IEEE PSES Main Website: http://www.ieee-pses.org/ > > To post a message send your e-mail to [email protected] > > Instructions for use of the list server: > > http://listserv.ieee.org/listserv/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. IEEE PSES Main Website: http://www.ieee-pses.org/ To post a message send your e-mail to [email protected] Instructions for use of the list server: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
