Carmen The UKAS website includes information on uncertainty. Try the following 2 links for general uncertainty and uncertainty in EMC in particular. General: http://www.ukas.com/Library/downloads/publications/M3003%20complete.pdf
EMC: http://www.ukas.com/Library/downloads/publications/Lab34.pdf Ian Gordon > -----Original Message----- > From: Carmen.Filimon [mailto:[email protected]] > Sent: 19 August 2004 14:42 > To: '[email protected]' > Subject: Measurement uncertainty procedure > > > Good morning all group, > > I am working with one of our local NCBs to get accredited as > a CB Testing > Laboratory (CBTL) recognized in the CB Scheme to conduct > testing and issue > CB test reports in-house under the responsibility of this > NCB (Testing at > the Manufacturing Premises) > > An internal lab procedure for the test equipment measurement > uncertainty is > required. I checked with our external calibration lab and the price of > getting the uncertainty stated in all test equipment Certificates of > Calibration will be very high. My intention is to buy the ISO > test equipment > metrology standard called "ISO Guide to the expression of > uncertainty in > measurements" for reference, but I am not quite sure if it is the most > helpful/handy document I can get. > > Did anyone else get through this process of measurement > uncertainty? Is any > software available for modeling the uncertainty equation for each test > equipment used in a test lab? Any inputs/comments will be appreciated. > > > Regards, > Carmen > *********************************************************************** This email is confidential and intended solely for the use of the individual to whom it is addressed. Any views or opinions presented are solely those of the author and do not necessarily represent those of the BOC Group plc or any of its affiliates. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing, or copying of this email is strictly prohibited. If you have received this email in error please return the message to the sender by replying to it and then delete the message from your computer. This footnote also confirms that this email message has been checked by anti-virus software for the presence of computer viruses. However, the BOC Group plc or any of its affiliates accepts no responsibility for any virus or defect that might arise from opening this e-mail or attachments. This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
