Good morning all group, I am working with one of our local NCBs to get accredited as a CB Testing Laboratory (CBTL) recognized in the CB Scheme to conduct testing and issue CB test reports in-house under the responsibility of this NCB (Testing at the Manufacturing Premises)
An internal lab procedure for the test equipment measurement uncertainty is required. I checked with our external calibration lab and the price of getting the uncertainty stated in all test equipment Certificates of Calibration will be very high. My intention is to buy the ISO test equipment metrology standard called "ISO Guide to the expression of uncertainty in measurements" for reference, but I am not quite sure if it is the most helpful/handy document I can get. Did anyone else get through this process of measurement uncertainty? Is any software available for modeling the uncertainty equation for each test equipment used in a test lab? Any inputs/comments will be appreciated. Regards, Carmen This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
