http://www.ieee-pses.org/symposium
          http://www.emc2004.org/


All
If you shoot somebody with a conventional gun you lose the operator of a
high speed vehicle and essential control of the car.  If you shoot the EM
disruptor  I  would guess you lose some control of your vehicle but
hopefully not essential brake pressure or steerage.  Its a tough problem.
My two cents.
Dan Anchondo
Test & Regulatory Engineer


From: [email protected]
[mailto:[email protected]]On Behalf Of Bill Flanigan
Sent: Wednesday, July 14, 2004 9:25 AM
To: [email protected]
Subject: EM Disruption of 'fleeing' autos


http://www.ieee-pses.org/symposium
          http://www.emc2004.org/


How will I get my car replaced after being rendered useless by an EMP
following (choose one):

a) accidental blast by rookie cop during testing/training
b) 'collateral de-commissioning' while in line-of-site of 'fleeing' bad guy
c) auto-neutralization following mistaken-identification
d) auto-sterilization for speeding
e) auto-immobilization for missing tail light

These uPs aren't going to grow new gates after an EMP, so start walking...



This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.

IEEE PSES Main Website:  http://www.ieee-pses.org/

To post a message send your e-mail to [email protected]

Instructions for use of the list server:

    http://listserv.ieee.org/listserv/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:

     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc



This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.

IEEE PSES Main Website:  http://www.ieee-pses.org/

To post a message send your e-mail to [email protected]

Instructions for use of the list server:

    http://listserv.ieee.org/listserv/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:

     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

Reply via email to