In article <[email protected] m>, Chris Maxwell <[email protected]> writes >No, I meant monel. I put the question mark after it because I knew >that it was available as a shielding material; but unsure of its >permeability. According to Laird technologies website, monel contains >Copper Iron and Tin. I assumed that the Iron would impart a >permeability higher than 1.
Fe 2% typical. The data sheets that I looked at don't even mention magnetic properties. -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
