In article <[email protected]
m>, Chris Maxwell <[email protected]> writes
>I would recommend a window with a fine, high mu wire (monel?) mesh
>shield. Tecknit and Chomerics make some shielded windows like this.
Monel (various grades, but typically Ni65/Cu33/Fe 2) is a corrosion-
resistant alloy. It appears not to have any special magnetic properties.
Perhaps you meant mu-metal ('Permalloy' etc.), a range of Ni/Fe alloys
that can have very high permeability.
--
Regards, John Woodgate, OOO - Own Opinions Only.
The good news is that nothing is compulsory.
The bad news is that everything is prohibited.
http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
