[email protected] wrote (in <[email protected]>) about 'EN vs IEC', on Fri, 3 Sep 2004: > I have a question about the standards EN 61326 & IEC 61326. I know > there is no difference between the two,
Not true: but it depends on what you mean by 'difference'. >but they are normally 1 > year apart. Which one is the correct one to use when selling to > Europe? The EN. >Also, In EN 55024, they call out the IEC 61000 series > standards. Why not EN? Look at Annex ZA, which gives the EN (or HD) to be used instead of the referenced IEC publication. Some IEC publications don't have an EN version, in which case you do use the IEC. -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
