Hi Gordon, I've sent him an e-mail asking... I'll post his reply. Not sure if he has taken a long weekend...
Cheers, Derek. Gordon,Ian wrote on 9/3/2004, 3:12 AM: > Derek > Did the committee member also say whether the immunity tests were to be > performed continuously or at specific spot frequencies? Furthermore, are > there any proposed exclusions from this requirement? e.g. if the product > does not contain clocks above, say, 1GHz this testing is not required. > I realise the best solution is to buy the document, but I cant see it > on the > IEC website - and BSI cant help either! > Does anyone from this group have a copy? > > Ian Gordon > -----Original Message----- > From: Derek Walton [mailto:[email protected]] > Sent: 03 September 2004 08:23 > To: [email protected] > Subject: EN 61326 > > > Hi Folks, > > a short while ago, a request was made for more info on EN 61326. I > recieved > this information from a committee member.: > > > The draft which prescribed the 2.7 GHz RF-Immunity limit is IEC > 65A/418/CDV. > The closing date for votes and comments is December 2004. Assuming > that the > majority of National Committees are in favor of the draft, and > assuming at > least some editorial and minor technical comments will have to be dealt > with, the earliest publication date is likely one year from now. That > date > considers the next working group meeting schedule of Spring 2005 where > comments can be resolved and a subsequent and successful vote on the FDIS > during the summer of 2005. > > > Cheers, > -- > Derek N. Walton > L F Research > Poplar Grove, IL 61065, USA > _____________________________________________________________________ > > *********************************************************************** > This email is confidential and intended solely for the use of the > individual to whom it is addressed. Any views or opinions presented > are solely those of the author and do not necessarily represent those > of the BOC Group plc or any of its affiliates. If you are not the > intended recipient, be advised that you have received this email in > error and that any use, dissemination, forwarding, printing, or > copying of this email is strictly prohibited. If you have received > this email in error please return the message to the sender by > replying to it and then delete the message from your computer. > > This footnote also confirms that this email message has been checked > by anti-virus software for the presence of computer viruses. However, > the BOC Group plc or any of its affiliates accepts no responsibility > for any virus or defect that might arise from opening this e-mail or > attachments. > -- Derek N. Walton L F Research Poplar Grove, IL 61065, USA This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
