Jim Stephen I was working at BSI in the very early 1970's and remember my own fingers being measured as a part of a survey to confirm the dimensions quoted in the then current standards - and I seem to remember (it was over 30 years ago!) that these were the ones in an IEC document of some sort (although the latter may not have been a standard at that time). I also remember taking a sample BS3042 (the previous British Standard - not 6305 or 6301) "IEC" finger to the USA in around 1981 to test some medical equipment - and receiving gales of laughter and "rude" comments when I showed it to the US engineers in our company! The full set of EN/IEC probes can be found in (BS) EN61032: 1998, IEC 61032: 1997 "Protection of persons and equipment by enclosures - probes for verification". FYI, if you want some more information on the subject of the sizes of fingers take a look at: - (BS EN) ISO 7250 "Basic human body measurements for technological design", - BS 7231-1 "Body measurements of boys and girls from birth up to 16.9 years. Part 1: information in the form of tables" - USA Federal Drug Administration Report FDA-72-70 May 1975, UM-HSRI-BI-75-5 physical characteristics of children As related to death and injury for consumer product design and use, which you can find on <http://www.itl.nist.gov/iaui/ovrt/projects/anthrokids/child.html> http://www.itl.nist.gov/iaui/ovrt/projects/anthrokids/child.html, Regards
John Allen, Technical Consultant EMC and Safety Engineering ERA Technology Ltd. Cleeve Road Leatherhead Surrey KT22 7SA UK Tel: +44-1372-367025 (Direct) +44-1372-367000 (Switchboard) Fax: +44-1372-367102 Please take a minute to visit my recently updated (Sept 04) web pages at <http://www.era.co.uk/services/rcm.asp> http://www.era.co.uk/services/rcm.asp and the main ERA Website at http://www.era.co.uk From: Stephen Phillips [mailto:[email protected]] Sent: 22 October 2004 13:19 To: JIM WIESE Cc: Emc-Pstc (E-mail) Subject: Re: IEC 60950 articulated finger probe Jim, I do recall that back in the early/mid 80's (before 950) - we referred to it as "The British Standard Finger". I believe it did originate in a British Safety spec. I was told at the time it represented the average British "pinky" finger. I don't recall what spec. it was we tested to at the time (it may have been BS 6305, or was it BS 6301?), but I would say it was sometime from 1982-1987 that the articulated finger rose to prominence and eventually into global standards. I hope this helps with your research. Please let me know what you find out, I'm nostalgic! Best regards, Stephen At 03:25 PM 10/20/2004, JIM WIESE wrote: Hello all, I am interested in the origins, and any substantiating research for the IEC 60950 articulated finger probe. Does anybody know where it originated or what research was performed to determine the dimensions of this probe? Thanks in advance, Jim Jim Wiese NEBS Project Manager/Senior Compliance Engineer ADTRAN, INC. 901 Explorer Blvd. P.O. Box 140000 Huntsville, AL 35814-4000 256-963-8431 256-963-8250 fax [email protected] _____________________________________________________________________ This e-mail has been scanned for viruses by MCI's Internet Managed Scanning Services - powered by MessageLabs. For further information visit http://www.mci.com ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ********************************************************************** Copyright ERA Technology Ltd. 2004. (www.era.co.uk). All rights reserved. The information supplied in this Commercial Communication should be treated in confidence. No liability whatsoever is accepted for any loss or damage suffered as a result of accessing this message or any attachments. ********************************************************************** _____________________________________________________________________ This e-mail has been scanned for viruses by MCI's Internet Managed Scanning Services - powered by MessageLabs. For further information visit http://www.mci.com ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
