Dear All, According to CISPR or EN55020, field immunity for large equipment not fitting in the open strip line shall be measured based on the following setup:
"The front side of the EUT shall be positioned parallel to the antenna line of sight." This measurement setup is shown in Section 5.8.4, p.39, EN55020:2002 and Section 5.8.4, p.77, CISPR20:2002. Can anyone let me know in detail how to setup the position of the EUT parallel to the antenna? Any comment will be appreciated. Thank you, -SEOL BYONG SU Samsung Advanced Institute of Technology This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
