The entire IEC 60364 collection is very large - check on the IEC website for a list.
The main problem with IEC 60364 it is - like the US NEC & the Canadian CEC - only a "model code of practice" - and almost every national implementation is slightly different. Therefore there are national deviations in every case to take account of existing national practices, and these are typically not identified as such, so, for example, many parts of BS7671 is substantially different to the equivalent sections of IEC 60364. That is probably also why the 60364 set has not yet become a set of EN's - although I believe that some sections have been partially adopted under the Harmonisation Document (HD) route - check the CENELEC site for more details. The good thing about the IEC structure is, however, that most countries roughly follow it when constructing their own national versions, and so it is easier to identify where those national deviations might be than was the case when the structure of each set of national wiring rules (they are rarely "regulations" as such) was entirely different. John Allen ERA Technology Ltd (from home) From: "Jim Eichner" <[email protected]> To: <[email protected]> Sent: Friday, December 10, 2004 10:48 PM Subject: RE: Wiring requirements in Europe > Thanks John/Ted. A CD with the entire IEC 60364 collection on it would > be a big help, but I'm sure you're right that it would be expensive! > > Jim Eichner, P.Eng. > Compliance Engineering Manager > Xantrex Technology Inc. > phone: (604) 422-2546 > fax: (604) 420-1591 > e-mail: [email protected] > web: www.xantrex.com > Confidentiality Notice: This email message, including any attachments, > is for the sole use of the intended recipient(s) and may contain > confidential and privileged information. Any unauthorized review, use, > disclosure or distribution is prohibited. If you are not the intended > recipient, please contact the sender by reply e-mail and destroy all > copies of the original message. > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of John Woodgate > Sent: Friday, December 10, 2004 2:21 PM > To: [email protected] > Subject: Re: Wiring requirements in Europe > > > In article <OF40D9CFDB.5D230ABB-ON86256F66.006A7362-86256F66.006BE881@ap > cc.com>, [email protected] writes > > >BS 7671 is a lot less expensive than buying all of EN 60364. > > Especially as 'EN 60364' does not exist. If it did, the UK Wiring > Regulations would HAVE to be 'BS EN 60364'. > > IEC 60364 exists. I tried to find out from the IEC site if it's > available as a CD, but I couldn't find out, so I've emailed them. Maybe > we get an answer on Monday. > -- > Regards, John Woodgate, OOO - Own Opinions Only. > The good news is that nothing is compulsory. > The bad news is that everything is prohibited. > http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk > > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to [email protected] > > Instructions: http://listserv.ieee.org/listserv/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas [email protected] > > For policy questions, send mail to: > > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to [email protected] > > Instructions: http://listserv.ieee.org/listserv/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas [email protected] > > For policy questions, send mail to: > > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
