Thanks John/Ted. A CD with the entire IEC 60364 collection on it would be a big help, but I'm sure you're right that it would be expensive!
Jim Eichner, P.Eng. Compliance Engineering Manager Xantrex Technology Inc. phone: (604) 422-2546 fax: (604) 420-1591 e-mail: [email protected] web: www.xantrex.com Confidentiality Notice: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. From: [email protected] [mailto:[email protected]] On Behalf Of John Woodgate Sent: Friday, December 10, 2004 2:21 PM To: [email protected] Subject: Re: Wiring requirements in Europe In article <OF40D9CFDB.5D230ABB-ON86256F66.006A7362-86256F66.006BE881@ap cc.com>, [email protected] writes >BS 7671 is a lot less expensive than buying all of EN 60364. Especially as 'EN 60364' does not exist. If it did, the UK Wiring Regulations would HAVE to be 'BS EN 60364'. IEC 60364 exists. I tried to find out from the IEC site if it's available as a CD, but I couldn't find out, so I've emailed them. Maybe we get an answer on Monday. -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
