There is the body capacitance of about 100 pF having a reactance of 27 M
at 60 Hz. Connected to a 120 VAC source there will be 4.5 uA RMS
current. Not much. If contact is made at the peak of the waveform (170
V) there will be charging current essentially identical to a 170 volt
ESD event. The peak current will be around 1/2 amp for around 5 ns. I
don't know that one can feel that. I can measure this if anyone wants me
to.

   Dave Cuthbert
   Micron Technology


From: [email protected]
[mailto:[email protected]] On Behalf Of John Woodgate
Sent: Friday, November 26, 2004 9:39 AM
To: [email protected]
Subject: Re: Is one-handed electrical shock possible?


In article <[email protected]>, Allen Tudor
<[email protected]> writes
>Does
>capacitance between the body and earth come into play?

Yes. And most things are a bit moist (except in Arizona, of course,
where even the water is dry, or so I am reliably informed), so there may
not be as much insulation resistance as appears at first sight.
--
Regards, John Woodgate, OOO - Own Opinions Only.
The good news is that nothing is compulsory.
The bad news is that everything is prohibited.
http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk


This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/listserv/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Ron Pickard:              [email protected]
     Scott Douglas             [email protected]

For policy questions, send mail to:

     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc


This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to [email protected]

Instructions:  http://listserv.ieee.org/listserv/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Ron Pickard:              [email protected]
     Scott Douglas             [email protected]

For policy questions, send mail to:

     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

Reply via email to