Thanks for the reply Ken. Thats exactly why I'm out looking.. I have the SMY01 that does what you describe, but I want to get rid of the external source, and the additional calibration step for Mod depth..
I have an Agilent 8251A that does exactly what I need, but stops at 250 kHz... If it only went down to 10 kHz I'd never buy anything else! Cheers, Derek. Ken Javor wrote on 12/17/2004, 4:37 PM: I have put a square wave into it before for MIL-STD-461E pulse modulation, but you are really amplitude modulating the waveform. That is, true pulse modulation acts like a switch in series with the rf output, whereas amplitude modulation increases the peak amplitude, and you have to account for that. On the other hand, it is hard to find signal sources down to 10 kHz with pulse modulation capability. ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
