Dear Bob,
Thanks for the attention paid. Which section of FCC should I refer
for getting more clarity about this?
Sincerely
K.Balasubramanian
Project Leader - Hardware.
[email protected]
Sent by: To: [email protected]
owner-emc-pstc@LISTSE cc:
RV.IEEE.ORG Subject: Re: Split ferrite
core & molded ferrite core
04/04/2005 10:03 PM
All things being equal, solid ferrite cores are more effective than split
cores.
Bob Heller
3M EMC Laboratory, 76-1-01
St. Paul, MN 55107-1208
Tel: 651- 778-6336
Fax: 651-778-6252
=========================
Kbalasubramanian@
scmmicro.co.in
Sent by: To
owner-emc-pstc@LI "'[email protected]'"
STSERV.IEEE.ORG <[email protected]>,
[email protected]
cc
04/04/2005 10:17
AM Subject
Split ferrite core & molded ferrite
core
Dear Experts,
Compliance testing for a product has been done with a split type
ferrite core in the cable and report has been prepared and submitted to
VCCI. For FCC & CE DoC has been prepared with photos showing the split type
ferrite core assembled at the appropriate position in the cable. Now the
manufacturing wants to replace the split core with a molded core. Is it
necessary to retest with this molded core and one more test report
generation? I request you experts to point out the stand on VCCI, CE & FCC
on this.
Sincerely
K.Balasubramanian
Project Leader - Hardware.
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
