Hi Charlie:
> The EUT has a UL listed PSU and its external ports are SELV - and I'm looking to obtain UL listing within 9 weeks. I haven't used UL for a few years, after finding that testing at an independent accredited test house then listing by another NRTL worked better, and am looking for recommendations for any of the following, and any "customer experience" as to whether any of them might be achievable in the 9 weeks: > > which UL office can go from receipt of product and documentation to listing the quickest assuming no non-compliances? > which office, if different, can do it fastest if there are any non-compliances, but these are addressed promptly? > which one will review a test report from a 3rd party test house, with or without CB certificate, and issue listing the quickest? I get a consistent 4-week promise from UL. And, as long as I provide all the required data and samples, I get the completed project in 4 weeks. UL has a UK office. I suggest you call upon them, along with your unit, and make a plan for certification. You need to know what they require from you to complete the job on time. Its best to sit down with a sample and go through it from head to toe. Best regards, Rich This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
