Hello everyone, We have a couple of low voltage(<30Vdc) DC IEC60065 type professional products which will not be shipped to Japan with a power supply. It is up to the installer to provide the power.
We have been told by our Japan office that these low voltage products should not have the PSE circle Mark on the label as they are under 100Vac. My questions are as follows: 1. Since these products are <100V are they exempt from the PSE circle Mark requirements? 2. If they are exempt from Safety requirements are they still required to meet EMC requirements for Japan? Are they required to bear the PSE Circle Mark to show EMC compliance similar to the CE requirements in Europe? Thanks in advance for your help. Regards, John Tyra Manager Product Safety Bose Corporation The Mountain, MS-450 Framingham, MA 01701-9168 Phone: 508-766-1502 Fax: 508-766-1145 ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
