Jasmine,
Sorry. There was a mistake in the information I sent before. The IEC
equivalent for AS/NZS 60065:2003 is IEC 60065:2001 not 1998. See correct
information below.
AS/NZS 3250 / AS/NZS 60065
Audio, Video and similar electronic apparatus – Safety requirements
History
1982 AS 3250:1982 (1st Edition)
1985 AS 3250:1985 (2nd Edition)
1990 AS 3250:1990 (3rd Edition)
1995 AS/NZS 3250:1995 (jointly revised and published as joint
Australian/NZ standard)
05 Jun 2000 AS/NZS 60065:2000 (revised and redesignated AS/NZS
60065)
· Is an adoption of IEC 60065:1998 with
National modifications
· Will expire on 01 Jul 06
01 Dec 2000 AS/NZS 60065:2000/Amdt 1:2000
18 Mar 2003 AS/NZS 60065:2000/Amdt 2:2003
08 May 2003 AS/NZS 60065:2003
· Is an adoption of IEC 60065:2001 with
National modifications
Best regards,
Kevin Richardson
Stanimore Pty Limited
Compliance Solutions for Technology
(Legislation/Regulations/Standards/Australian Agent Services)
Ph: 02-4329-4070 (Int'l: +61-2-4329-4070)
Fax: 02-4328-5639 (Int'l: +61-2-4328-5639)
Mobile: 04-1224-1620 (Int'l: +61-4-1224-1620)
Email: [email protected]
URL: www.stanimore.com
This material (this message and the information contained in all attachments
to this message) is confidential and/or privileged information and is
intended only for the addressee/s named above. Any unauthorised
dissemination, copying, use of or reliance upon this material by persons or
entities other than the addressee/s named above is prohibited. If you
receive this material in error, please notify Stanimore Pty Limited and
destroy all copies electronic and hardcopy) of this message and all
attachments immediately.
From: Jasmine TAN [mailto:[email protected]]
Sent: Friday, 5 August 2005 11:39 PM
To: [email protected]
Cc: Emc-Pstc@Ieee. Org; Robert Johnson
Subject: RE: Effective dates of standards
Hi ,
Does anyone has the history for IEC60065 6th and 7th Edition & it's
National Deviation ?
Please share.
Thanks in advance!
Jasmine
Notice
The information in this message is confidential and may be legally
privileged. It is intended solely for the addressee. Access to this
message by anyone else is unauthorized. If you are not the intended
recipient, any disclosure, copying or distribution of the message, or
any action taken by you in reliance on it, is prohibited and may be
unlawful. If you have received this message in error, please delete it
and contact the sender immediately. Thank you.
"Kevin
Richardson"
<kevin.richardson To
@ieee.org> "Robert Johnson"
Sent by: <[email protected]>, "wendy"
[email protected] <[email protected]>
cc
"Emc-Pstc@Ieee. Org"
08/05/2005 07:45 <[email protected]>
AM Subject
RE: Effective dates of standards
Please respond to
<kevin.richardson
@ieee.org>
Hi Bob,
We have not communicated in a long time.
Just thought I would add a little info concerning your listing for the
history of the Australian equivalents to IEC 60950. Additional info in RED
font.
Australia |
n |
Standards |
Associati |
on |
new = new |
designs, |
old = |
current |
productio |
n without |
major |
changes |
--------------------------------------------------------------------+-
Standard |Version |Subject|Issued |Expire· |Comments |
AS/NZS | | | | | |
---------+--------+-------+----------+-----------+------------------+-
3260 |1988 |ITE |1988 |5 Jun 2003 |IEC 950 1st Ed |
---------+--------+-------+----------+-----------+------------------+-
3260 |1993 |ITE |15 Feb 93 |5 Jun 2003 |IEC 950 2nd Ed |
---------+--------+-------+----------+-----------+------------------+-
60950 |2000 |ITE |5 Jun 00 |1 Jul 06 |IEC 60950 3rd Ed |
---------+--------+-------+----------+-----------+------------------+-
60950.1: |2003 |ITE |15 Sep 03 |current |IEC 60950-1 |
Best regards,
Kevin Richardson
Stanimore Pty Limited
Compliance Solutions for Technology
(Legislation/Regulations/Standards/Australian Agent Services)
Ph: 02-4329-4070 (Int'l: +61-2-4329-4070)
Fax: 02-4328-5639 (Int'l: +61-2-4328-5639)
Mobile: 04-1224-1620 (Int'l: +61-4-1224-1620)
Email: [email protected]
URL: www.stanimore.com
This material (this message and the information contained in all
attachments to this message) is confidential and/or privileged information
and is intended only for the addressee/s named above. Any unauthorised
dissemination, copying, use of or reliance upon this material by persons or
entities other than the addressee/s named above is prohibited. If you
receive this material in error, please notify Stanimore Pty Limited and
destroy all copies electronic and hardcopy) of this message and all
attachments immediately.
-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Robert
Johnson
Sent: Thursday, 4 August 2005 2:11 PM
To: wendy
Cc: Emc-Pstc@Ieee. Org
Subject: Re: Effective dates of standards
Check http://www.itesafety.com/history.htm
wendy wrote:
Is there a website where I can quickly check the effective
implementing or withdrawal dates of standards?
Thanks.
Regards,
Wendy Nya
LabOne Singapore Pte Ltd
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to
[email protected]
Instructions:
http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell
[email protected]
For policy questions, send mail to:
Richard Nute: [email protected] Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web
at:
http://www.ieeecommunities.org/emc-pstc
---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions:
http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell [email protected]
For policy questions, send mail to:
Richard Nute: [email protected] Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell [email protected]
For policy questions, send mail to:
Richard Nute: [email protected] Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
ForwardSourceID:NT00052F16
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/listserv/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
