Hi Bob, These systems do not have their own specific FCC rule part to comply with but do require certification. They are subject to certification to Part 15 and must comply with 15.107, 15.207 and 15.209.
For the EU, I believe they must comply with ETS 300 330 and 300 683-1 from what I have read. Kind Regards, Sam Wismer Technical Director ACS, Inc. *Tel: (770) 831-8048 *Fax: (770) 831-8598 *Web: www.acstestlab.com *Email: [email protected] ****************CONFIDENTIAL**************** This e-mail and any attachments may contain information which is confidential, proprietary, privileged or otherwise protected by law. The information is solely intended for the named addressee (or a person responsible for delivering it to the addressee). If you are not the intended recipient of this message, you are not authorized to read, print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, please notify the sender immediately by return e-mail and delete it from your computer. From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Tuesday, August 02, 2005 7:55 AM To: [email protected] Subject: EAS Equipment Does anyone know what standards might apply for EAS equipment (Electronic Article Surveillance). The system is basically a field disturbance system at 14 kHz. Thanks, Bob Heller 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651- 778-6336 Fax: 651-778-6252 ========================= This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
