My thanks to those that have responded. I would like to add some clarity to my original question.
Sanmina-SCI's EMC reports have routinely been accepted by BSMI for product modifications and samples were not required, except where the modifications were extensive. For recent submittals, we've also included CB Scheme reports, as applicable. The advice we are receiving (mentioned below) is that for _all_ submittals, not just those for original certifications, will require samples for review. Regards, Peter L. Tarver, PE [email protected] > From: Peter L. > Tarver > Sent: Friday, July 29, 2005 12:27 PM > > > Howdy! Howdy! Howdy! > > Happy Friday. > > It has been well aired that BSMI now has product safety > requirements for certain products. Perhaps less > aired, but > still widely known, BSMI is willing to accept CB Scheme > Certificates and Test Reports issued by NCBs that have > troubled to register with BSMI. See: > > http://web-server.bsmi.gov.tw/english/law/gov-guid.doc > > Paragraph 3 of the above referenced document > indicates that > samples *might* be requested by the 'domestic' > lab reviewing > the CB documents, if they have any question about the > compliance status of the product under submittal for > certification. Samples are *required* for the submittal. > > We have a consultant advising us that, not only > is safety a > part of the applicable BSMI requirements, but > that a sample > is explicitly required for review by the > 'domestic' lab, to > allow them to compare the product to the CB documents. > > After some bit of research, I can find no reference that > explicitly requires samples. I expect that, as > is common or > Asia Pacific countries, the documentation available in > English is a drop in the bucket compared to the sum of all > relevant documents. Can anyone confirm whether or not > samples are *required* for BSMI submittals? > > > Regards, > > Peter L. Tarver, PE > [email protected] > > -------------------------------------------------- > -------------- > This message is from the IEEE Product Safety > Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ____________________________________________________________ _________________ Scanned by Sanmina-SCI eShield ____________________________________________________________ _________________ ____________________________________________________________ _________________ Scanned by Sanmina-SCI eShield ____________________________________________________________ _________________ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
