Ladies and Gentlemen, The following is for your information. Please reply to the contact noted below. Cisco Systems has an opening for a Hardware Engineer IV, in San Jose, California. Will participate on a project team of design and test engineers involved in the product EMC specification, design, development, and test of telecom hardware, and may include any of the following responsibilities: - Collaboration in defining the design, implementation processes, and product evaluation procedures - Independently participate on project team meetings involved in the product design, planning, testing, and approval for company's products worldwide - Understand and interpret EMC worldwide requirements, testing, and approvals effectively - Conduct board and system level EMI/EMC analysis including schematics, PCB layout, mechanical, and power supply design to draw conclusions from analysis and make formal EMC design recommendations to the engineering team - Debug complex system level EMC problems and write board and product level functional design specifications and hardware manuals - Interact with corporate compliance engineers, regulatory agency agents, sales, marketing, customer advocacy, and direct customers to coordinate resolution of product design, test, and approval issues - Manage department HW equipment inventory, project test plan, test report, and certificate database Position requires: Direct knowledge of EMC standards like: CFR 47, EN550xx, EN61000-x-y, EN300386, Resolution 237, and CISPR22 EMC standards - Demonstrate understanding how the EMC requirements apply to the company product design - Demonstrate a strong ability to work with Hardware and PC Board designers on board level, EMI suppression (including RF, Digital and Analog circuitry) and Immunity - Experience with all compliance EMC test equipments; like Signal generator, RF receiver, Amplifier, Spectrum analyzer, Oscilloscope, limiter, attenuator, probe, and surge equipments - Design tool simulation proficiency like HSPICE is a plus - Experience with design of LAN and WAN interfaces; WiFi and Radio are a plus
Typically requires MSEE/CS combined with 5-7 years of related experience, or BSEE/CS combined with 7-10+ yrs related experience. Please forward your resume in Word format to: <blocked::mailto:rebed...@cisco.com> <blocked::mailto:rebed...@cisco.com?subject=Hardware Engineer IV (HW4EMC)> rebed...@cisco.com and use reference code HWEMC - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
