Hello group,
I’ve been asked about Japanese compliance requirements. Specifically, this brings up six questions to me: 1. Is there a Japanese equivalent to EN 61326-1? Or are there no EMC regulations on Test and Measurement equipment in Japan? Or, will Japanese authorities accept EN 61326-1? 2. Is there a Japanese equivalent to EN 61010-1? Or are there no safety regulations on Test and Measurement equipment in Japen? Or, will Japanese authorities accept EN 61010-1? 3. Same as question 2 for EN 60950. 4. Same question for EN 55022 and EN55024 (ITE equipment) 5. What about power supplies? Many of our products use external AC/DC adapters. Is there a special mark that I need to look for? Here, I’m wondering if we may be OK with our test and measurement equipment; but perhaps we’ll have to take a second look at the power supplies. Or, again, will Japanese authorities accept a power supplyEN 60950 or EN 61010-1? 6. What about “Connection Approval”? We have one product which has a phone jack for a remote reset circuit (you call the product, if the phone rings 3 times, it re-boots itself). How would we go about getting connection approval? 7. If we are short on approvals, do we have to test in Japan; or do they have Memoranda of Understanding with A2LA or NVLAP? I know that I’ll have to do some digging myself; but I was hoping that the group could at least flesh out some of the requirements for me. If all else fails; does anybody know of a good website, ideally maintained by the Japanese authorities, where I could search for these answers myself? Thanks, Chris Maxwell, Design Engineer | Compliance Engineer Email: <mailto:[email protected]> [email protected], Desk Phone: 315-266-5128 Engineering Department Fax: 315-797-8024 NetTest (New York) Inc. 6 Rhoads Drive, Building 4, Utica, NY USA Web: <http://www.nettest.com> www.nettest.com, Phone: 315-797-4449 NetTest, a Member of the Anritsu Group - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
