Folks, We are in the processes of adding a telecom test suite ( for South Africa) to our in house facility. In the standard ( they call out a surge waveform that I am not familiar with. It is described in the document as follows
Open Circuit Voltage waveform 640nS/32uS Short circuit current waveform 3/37uS. The source impedance is 15 ohms Test voltage is 4KV. Anybody familiar with that waveform? Anybody make a generator for the same? Thanks Kind Regards, Kevin Harris Manager, Approvals Group Digital Security Controls 3301 Langstaff Road Concord, Ontario CANADA L4K 4L2 Tel: +1 905 760 3000 Ext. 2378 Fax +1 905 760 3020 Email: [email protected] This transmission is intended to be delivered only to the named addressee(s) and may contain information that is confidential or proprietary. If this information is received by anyone other than the named addressee(s), the recipient(s) should immediately notify the sender by e-mail or by telephone at 905-760-3000 and delete this message. In no event shall this material be read, used, copied, reproduced, stored or retained by anyone other than the named addressee(s), except with the express written consent of the sender. Thank you. - 2005 IEEE Symposium on Product Safety Engineering 3-4 October Schaumburg, IL http://www.ieee-pses.org/symposium ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
