HI Anders As to the second question about SAR; if the device is in a portable configuration (i.e. held to the ear or worn on the body) SAR must be done. If it is in a mobile only configuration where a specified separation distance is kept, then MPE calculation are done.
Also remember that only transmitters are done in the licensed bands. Modular approvals under the FCC Modular approval docket are for part 15 devices. Thanks Dennis Ward Evaluation Engineer American TCB Certification Resource for the Wireless Industry www.atcb.com 703-847-4700 fax 703-847-6888 direct - 703-880-4841 or 209-966-2145 NOTICE: This E-Mail message and any attachment may contain privileged or company proprietary information. If you received this message in error, please return to the sender. From: [email protected] [mailto:[email protected]] On Behalf Of Anders Svensson B (LI/EAB) Sent: Friday, September 23, 2005 1:32 AM To: [email protected] Subject: Requirements for a Fixed wireless terminal Hi group, For a fixed wireless terminal with a WCDMA board included we should have the option to use a external antenna and my question is if there are any requirements for the antenna connector to be used. (I´m aware of the requirements for WLAN antenna connectors that have the requirements for a unique connector to be used so I thought that that maybe it should be the same for a WCDM board). I have looked in FCC part 24 but have not find any requirement for unique antenna connector. The intended markets are US, EU, Australia and New Zealand Anyone who can give me some input if there are any requirements for the antenna connector? Second question Do we need to do any SAR measurements for such device or it´s ok to do a calculation of the maximum permission Exposure? (I think it should be classified as a Mobile device)? Regards Anders - 2005 IEEE Symposium on Product Safety Engineering 3-4 October Schaumburg, IL http://www.ieee-pses.org/symposium This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - 2005 IEEE Symposium on Product Safety Engineering 3-4 October Schaumburg, IL http://www.ieee-pses.org/symposium This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
