Hi Lee, Try these guys. www.4 <http://www.4emi.com> emi.com EMI Solutions LLC 15 Hammond, Ste. 311 Irvine, CA 92618 USA Tel: 949-206-9960 Fax: 949-206-9983 E-mail: [email protected]
Description: Provides a line of high-performance, cost-effective filtering solutions for EMI needs. Products from filtered D-subminiature and high-density connectors to filter wafer inserts for many styles and configurations of connectors including MIL-C-38999 and MIL-C-26482 are also offered. The filter inserts installed over mated connector pairs with no change to current design. The filter products provide EMI filtering or transient suppression on each pin to help meet European and U.S. regulatory requirements. Jeff Collins [email protected] wrote: Hi Lee, I have had some success with alll of the following vendors for these parts: Coilcraft L-com Wurth Electroniks Amphenol For a very nice Amphenol kit with all metal parts, four different capacitor values and four different D-sub sizes, Contact [email protected]. Regards, Jonathan Stewart EMC Manager Bureau Veritas [email protected] "Lee Hill" <[email protected]> Sent by: [email protected] 12/15/2005 02:07 PM To <[email protected]> cc Subject alternative to conec filtered dsub Holiday greetings to everyone: I am looking for an alternative to the popular Conec line of filtered dsub connectors Their price may or not be ok right now, but their lead time definitely is not. Does anyone have any favorite vendors? Just looking for a moderate performance, simple single element capacitive element, one per pin This request is limited to specific vendor suggestions, unfortunately (yuck) there is no design alternative to a filtered connector at this time. Thank you & Best Regards Lee Lee Hill Founding Partner SILENT 10 Northern Boulevard, Suite 1 Northwood Executive Park Amherst, New Hampshire 03031 603-578-1842 x203 (v) 603-578-1843 (f)) [email protected] "Solutions for your noisy world" Electromagnetic Compatibility and RF Design, Troubleshooting, and Training - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
