Thanks John. I figured there was one.
Jim Eichner, P.Eng. Compliance Engineering Manager Xantrex Technology Inc. phone: (604) 422-2546 fax: (604) 420-1591 e-mail: [email protected] web: www.xantrex.com Confidentiality Notice: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. From: [email protected] On Behalf Of John Woodgate Sent: Tuesday, November 29, 2005 12:21 PM To: [email protected] Subject: Re: Horizontal standard for insulation temperature classes? Jim Eichner <[email protected]> wrote (in <[email protected]>) about 'Horizontal standard for insulation temperature classes?', on Tue, 29 Nov 2005: >Question: Is there an IEC or EN that serves as a horizontal standard >for temperature classes and their limits? IEC 62114. You could find this out from the public part of the IEC web site, but it isn't easy in this case. -- Regards, John Woodgate, OOO - Own Opinions Only. Deadlines are 90% of deadliness. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
