John: Are you saying that there's a new version of 60664 that has radically different number? If so, what is the date on the new version, for the -1, -2, and -3 standards?
We currently own 60664-1 up to and including A2:2002 60664-3:2003 Are those the old versions or the new "radical revision" versions? Jim Eichner, P.Eng. Compliance Engineering Manager Xantrex Technology Inc. phone: (604) 422-2546 fax: (604) 420-1591 e-mail: [email protected] web: www.xantrex.com Confidentiality Notice: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. From: [email protected] [mailto:[email protected]] On Behalf Of John Woodgate Sent: Thursday, January 12, 2006 9:27 AM To: [email protected] Subject: Re: EN 60065:2002 - Table 8 creepage and clearance In message <[email protected]>, dated Thu, 12 Jan 2006, "James, Chris" <[email protected]> writes >The table 8 values in the new standard do not appear to correlate with >the Fig 9 values of the previous standards. > > > >Fig 9 gave basic clearance as 3mm and reinforced as 6mm for nominal >240Vac whereas Table 8 seems to imply values half of that. > > > >What am I missing??? The requirements for creepage and clearance were radically reviewed, not by TC108 but by TC28, TC109 and TC64. The new numbers reflect the radical revision. See IEC 60664. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk 2006 is YMMVI- Your mileage may vary immoderately. John Woodgate - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
